Showing posts with label RepRap. Show all posts
Showing posts with label RepRap. Show all posts

Friday, December 9, 2011

IT'S ALIVE!!!!

Yeah that title is cliché as all get out but deal with it. :-) Currently I'm excited that the projects not dead. That sentence needs a little back story. Last week (that time I should have been studying for finals) I got everything hooked up and ready to go with the motor drivers and Boarduino sled I constructed to hook all those motors up in a cleaner manner. I eventually got enough spare time to get it all hooked up to the CNC and with bated breath to see if it would work. Yeah I spelled that right too! I googled it. Anyway, the whole thing went to hell as soon as I gave it the command to move any of the axes. The motor were skipping steps like crazy. There just wasn't anything that was going to make it all work.

I didn't throw anything. I didn't even get super upset. This project has been going on for years. Literally. Its just another hurdle in the road I told myself. So I left the garage and started looking for the solution. The Gecko g540 is probably the most recommended motor driver  over on CNCzone.com so thats where I started. Ahren over at CNCRP has a kit that comes with everything to fit the need I was having.

http://www.cncrouterparts.com/3-axis-electronics-kit-p-74.html?cPath=22

For the small price of $520 the quick and easy solution could be mine. Right? Well no. Since Ive spent the majority of my project fund on the table itself I don't have enough left over to purchase such a fine piece of equipment. More on that later though.

Back to the drawing board I went. (another cliché phrase, is this guy kidding?)  The RepRap stepper driver V2.3 that I've built and am using is built around the Allegro A3982. Not much information is out there about the max specs of the v2.3 driver boards but Allegro provides specs for their chips so I just assumed that the circuit was built to utilize its capabilities.

"The A3982 is a complete stepper motor driver with built in translator for easy operation. It is designed to operate bipolar stepper motors in full- and half-step modes, with an output drive capacity of up to 35 V and ±2 A. The A3982 includes a fixed off-time current regulator which has the ability to operate in slow or mixed decay modes."

Hey I've got four, count them four, of these little drivers and I planned on frying one in the process anyway. After frying a HobbyCNC driver back in the first days of this project Ive come to expect to break a few things from time to time. So I scrounged up the biggest laptop supply I could find, cut the end off of it, found another old ATX power supply, cut the end off that too. Then I wired it all together and gave it a go.


After all that you're wanting me to say it ran perfect and I went on to cut something out or anything spectacular. Well not exactly. It bound up but it did have moments where it ran like it should. Even after cleaning the screw, the rails, and a light WD-40ing, it still bound in places going at the G0 rapid linear motion speed. At the slower G1 speed it did much better. This signifies that the motors are at the edge of their performance curve. Fortunately, Im still only running them at a fraction of what their capable of. Currently Ive got a 20v 6A power supply. Meaning that if I can get a hold of one closer to 35V it should make enough difference to get back on track to hit that dead line.

 

For now, enjoy this video of my latest Rube Godlberg project that knocks over a can of WD-40


Saturday, December 3, 2011

Making the stable connection

 Its like one of those movies that starts with the ending scene. I put together a "Shield" for the Boarduaino to connect the motor drivers. Now its one step further away from looking so ghetto. Unfortunately one of the shafts of the steppers is slightly bent. Its not something I've noticed before so I'm pretty bummed. Never the less I'm hoping that its not enough to matter with helical cut motor couplers. 



I'm weird about symmetry so three motor connectors just wouldn't work. Which is cool because I have four stepper drivers to. Maybe one day Ill incorporate a fourth axis. For now its just a spare connector on the proto board since there's no designated pin for a fourth axis in the GRBL config file.

 There are 4 pins required to run each of the stepper drivers. 2 ground pins, a STEP pin, and a DIR pin. Its complicated to route the wiring on the bottom of the proto board without making it look like a rats nest. A finger nail clipper makes a great wire cutter. Its easy to handle and if you have a hang nail its good for that too. :-)









Here's a picture of the final wiring on the underside of the proto board. It's all pretty close but there's no shorts. The wiring will be hidden in the end when the whole thing is mounted in the computer case.

Hopefully Ill get a chance to connect this all back to the table later this week. Ive got some finals and a proposal to give to the Biosystems Engineering Department. Here's a couple pictures for you interwebians.



























Sunday, October 9, 2011

Competition motivates me!


I wasn't planning on working on the machine today but I was inspired by one of the other members on CNCzone. KriegKuts is in the process of building a FLA-100 as well. Dude's Build Thread can be found at the link provided! The rail system I set up to drill the holes for the X rail needed to be modified for the 6 inch Y rail. Basically instead of the small bolts and wing nuts I had to use a C clamp. Not as elegant but it worked. Today I didnt have the help of my dad so having a plethra (<---Nice word huh?) of C clamps of all shapes and sizes to hold the rail as I drilled it. I skipped the mid size bit this time and went straight from the center bit to the 3/8 bit.

I was going to stop here for the day but then I realized that the Z axis only needed 6 holes to be mounted. I didnt trim the rail or the supporting 8020 extrusion so pretend you don't see that. As for going straight to the 3/8 bit.


 



You can see it turned out fine. Im sure it shortened the life of the bit but after today Im done with it and its paid for itself. I bought 2 and only needed 1. That means Lowes gets to have one of their nice $11 kick ass bits back Im am so amazed that Im able to work with raw steel and get precise enough results to even slide the rail into the extrusion. 

Without adjustment of anything I checked the height of the bottom of the Z rail on both sides. Less than 1/16th of an inch different. Thats nuts. Now Im off to check my bank account and see what I need to do to pick up the power components.

$310 plus shipping. Ouch. But that's all that stands between me and moving on to the electronics....which Ill be salvaging from my last build. Arduino + DIY Reprap drivers + some creative thinking. Thats the teaser of the day.