Stop the CLOCK!!!!!!!!

34 : 23 : 33 : 33 Day Hr Min Sec

That's it! I have met my goal. I am almost a full 34 days past due but I'm finally there. A lot has gone on in the last two weeks so let me hit the highlights of that real quick.
I got the new hardware in not last Friday but the Friday before. As you can see I took a shot of the new motor vs. the old one. Its almost twice as large. I got all the hardware hooked up and installed the latest version of Linux CNC ( formerly Linux EMC) and did what anyone would do in their right mind. I found some double sided tape and a Sharpie and hit play. It came out twice as large as it should and reversed in the X-axis. Both easy fixes in EMC. I kept the rev per inch on the rod at the default of 20 in order to keep things nice and big since I had a whole poster board to work with







I played with a couple other test files including a couple spiral patterns and a snow flake. It was the greatest feeling on earth to see this thing run.


I spent several hours just going through the software and getting acclimated to the controls and which direction was what on the screen as opposed to on the table. My dad hung the posters from the wall in the garage like I was in kindergarten. It awesome. My parents weren't my parents during that period of my life so its fair game now. That was all the excitement I could handle last weekend.


I spent the entirety of last week thinking about the CNC. It was so bad I had dreams about it. I kept looking at parts from my small engines class and thinking if I could draw them up in AutoCAD. I picked up a copy of MasterCAM and installed it. Sadly there is almost no information on how to use it. There are two or three books on Amazon, a couple online classes you can pay for, and a couple DVDs you can buy but nothing for the person that's not sure what sources of information are really good and which ones are garbage. I finally came across this site;

http://www.cudacountry.net/html/mastercamx_toc.html

Those are free PDFs and are extremely well documented. They have window screen shots, button screen shots. Its simple to follow. I cant imagine how long it took to create them but man am I glad that I found them. I ran through a couple of the first CAM guides and waited for the weekend to roll around.

Once it did, we built a mount for a supercharged Dremel looking tool. Its made by Bosch but I didn't thing it was going to handle this job. I was glad to be wrong and another moment even better than what I mentioned came about. I crossed the line that I set for myself shortly after starting this blog. I cut a tangible object.  I cut an EMC logo in the double size and then recalibrated to cut a logo in a one-to-one scale. The one-to-one scale is sitting in front of me as I type. I may sleep with it under my pillow. The larger one stayed with my dad and I wouldn't be surprised to find it hanging on a wall somewhere the next time I go over to my parents place.

Here's a video just to show off. Enjoy the screaching sounds. I wanted to cut the sound and have it be a silent film but apparently that's not an option. YouTube should get one that but until then turn the volume down.

Where to now that I've met this goal? Well I'm going to take it all apart and sell it for scrap....Nope. Not even funny. Even as I look at the screen I'm not laughing. Well I've got some ideas. I'm thinking about making an enclosure to hold all my air ride equipment and sound equipment for the Blazer. Im also thinking about guitar bodies, and missing dashboard buttons, and signage, and random small engine parts.

Short Update!

 
23:14:07:13 passed the deadline

I'm now five hundred bucks poorer! Why am I sooo excited about that you ask? If you'll take a look at the nice picture on the right ----------------------------->

You will see that the money will soon be converted into a set of three high torque stepper motors, a Gecko g540 motor driver, and a matched power supply to get this party started! Hell yeah I'm excited. This should make getting up and running a lot easier. No more dealing with the Arduino and those tiny tiny stepper motors I was playing with. On a side note I will most likely be building a 3d printed or something smaller when I get the CNC up and running. So in the end those stepper motors will have a home....even if I end up selling the whole thing.

For those wondering, I got the job at ORNL and that's the main reason I have the excess financial funding needed to acquire these final pieces. There are upsides and downsides to this deal though. The upside is that I have a job and am being paid good money. The downside is that this is only a spring term internship with the possibility of extension. So the hunt is still on for a permanent job once I graduate. I've got some leads but nothing solid at this point. Fortunately my resume is getting full of all kinds of different and important acronyms that make me a strong candidate for many positions.

Tip for those looking for a job in the science/research field. Mention specific instruments you have worked with in your resume. HPLC, GC, NIR, Bioflo reactors, Fermentors,  Mills, etc, etc. It tells the reader what kinds of things you can already do and also says that someone trusted you with high dollar research equipment.

More to come when it unfolds.

23:14:20:37 passed the deadline

Late...again

Well its now 55 minutes into the new year. 55 minutes past my CNC dead line. Sadly I didn't make that dead line but I am close.
What do I have? I have a CNC table with working X and Y axis. The Z axis wouldn't run due to the less than capable stepper motors. the final thing I have moving forward us a clear path and end goal.
That path is to buy a gecko 540 drive and stepper motors. This will run over $500 but its going to be controlling a $1500 table so that price is on par. I've been hired on at ORNL so I will be able to generate the capital required to finish this project up. So here's the big question. When? That's the hard line. This next semester is going to be jam packed. Senior design. The ORNL internship. Searching for a post graduation job. The list goes on.  My initial though was to push the deadline out till the end of February but to be safe I'm going to say March 15th. This gives me time to gather the funds, wait for it to be shipped, have some unknown delay, get it together, and crank out a piece.
There it is. I'm happy. Big things are happening this year. I graduate. I get a real time job. I finish the CNC.
Thanks for reading
Steve

A home of its own.

Well, I finally got the spare cash flow to order the rest of the power train components for the CNC. I picked up the couplers, shafts, and collars from Ahren at CNCrouterParts. That dude is fast. I emailed him a question and within the hour he had replied. I ordered the gear from him and it was at my house 2 days later. He is legit and a great person to do business with. I also got some astounding service from McMaster. I ordered the ACME rods from them and they were on my door step the next day. Crazy stuff compared to some of the other troubles I've had in the past from other companies.







I went over to my Dads shop to get to work on the power train and ended up building a rolling cart from random scrap pieces of building materials he had laying around the shop! As you can see I've found out you can post pictures beside text. So enjoy this new feature! Any way. There it is. Its held together with what I would call sewing needles (air-gun "nails") and glue. ;-) Its on wheels so its easily movable and once I cut some slots out in the faces of the cart it will be able to hold the electronics pretty well. Unfortunately, building this also means that I didn't even touch the CNC other than to pick it up and put it on the cart.  With classes coming to an end I'm going to have to hit it hard to make some free time to finish this up.  As I sit here and type this post Ive got 52 days 10 hours 40 minutes and 5 seconds...4 seconds...3 seconds... Its coming up on the CNC deadline.

That brings me to my next point. What is finished? Where is the line? I'd like to define that. The end goal is to have a working CNC machine....and something cut from said machine. I want to start the 2012 with a working tool that can be used to take a drawing and translate it into a physical piece you can hold in your hand. With the current hardware I think I'm going to be limited to circuit boards and 2 dimensional objects  due to some of the limitations of my driver setup and the gcode interpreter. We'll have to start there.

What's my hardware setup? Fair question. I think I may have alluded to it in the past. Its another DIY project I did in the past. Its troublesome...its unreliable, Its even ugly but I built it. Its a trio of reprap driver boards that I learned to make using solder paste, surface mount components, and an electric skillet. Yeah it worked great. Really. Anyway the thing is that there's a bunch of wires coming and going from each of the drivers to a boarduino (also a DIY project. First thing I ever soldered). It needs to be cleaned up and wire managed. Currently its all mounted in an old PC case. It ran one of the previous CNC machines I attempted. When I say "ran" I mean that very...very...very loosely. I was able to feed the boarduino a single gcode command through a terminal and it would execute it. Above that things would go wrong instantly. There were timing issues, wiring issues, and above all the screws were just that. They were threaded rods from lowes. The would bind and get all kinds of messed up. Ill try to pull a picture of the one thing I cut with it. Its just a couple of lines in a piece of MDF. I use it as the picture for my Dad when he calls my phone. He takes time out of his life to help me with these projects so I figure he deserves that.

Moving on past that learning experience. This time I have real ACME rods and legit hardware. Things such as helical couplers and thrust bearings.  Things that I couldn't afford back in the first two iterations of this project. Ill end the post with this.

Precision isn't cheap and no amount of engineering and creativity can be substituted for a well designed part. Sometimes you have to bite the bullet and buy the $20 dollar couplers or the $30 dollar carriages rather than trying to engineer your own.

Steve-O