Showing posts with label Plans. Show all posts
Showing posts with label Plans. Show all posts

Saturday, February 4, 2012

Stop the CLOCK!!!!!!!!


34:23:33:33
DayHrMinSec






That's it! I have met my goal. I am almost a full 34 days past due but I'm finally there. A lot has gone on in the last two weeks so let me hit the highlights of that real quick.
I got the new hardware in not last Friday but the Friday before. As you can see I took a shot of the new motor vs. the old one. Its almost twice as large. I got all the hardware hooked up and installed the latest version of Linux CNC ( formerly Linux EMC) and did what anyone would do in their right mind. I found some double sided tape and a Sharpie and hit play. It came out twice as large as it should and reversed in the X-axis. Both easy fixes in EMC. I kept the rev per inch on the rod at the default of 20 in order to keep things nice and big since I had a whole poster board to work with







I played with a couple other test files including a couple spiral patterns and a snow flake. It was the greatest feeling on earth to see this thing run.


I spent several hours just going through the software and getting acclimated to the controls and which direction was what on the screen as opposed to on the table. My dad hung the posters from the wall in the garage like I was in kindergarten. It awesome. My parents weren't my parents during that period of my life so its fair game now. That was all the excitement I could handle last weekend.


I spent the entirety of last week thinking about the CNC. It was so bad I had dreams about it. I kept looking at parts from my small engines class and thinking if I could draw them up in AutoCAD. I picked up a copy of MasterCAM and installed it. Sadly there is almost no information on how to use it. There are two or three books on Amazon, a couple online classes you can pay for, and a couple DVDs you can buy but nothing for the person that's not sure what sources of information are really good and which ones are garbage. I finally came across this site;


Those are free PDFs and are extremely well documented. They have window screen shots, button screen shots. Its simple to follow. I cant imagine how long it took to create them but man am I glad that I found them. I ran through a couple of the first CAM guides and waited for the weekend to roll around.



Once it did, we built a mount for a supercharged Dremel looking tool. Its made by Bosch but I didn't thing it was going to handle this job. I was glad to be wrong and another moment even better than what I mentioned came about. I crossed the line that I set for myself shortly after starting this blog. I cut a tangible object.  I cut an EMC logo in the double size and then recalibrated to cut a logo in a one-to-one scale. The one-to-one scale is sitting in front of me as I type. I may sleep with it under my pillow. The larger one stayed with my dad and I wouldn't be surprised to find it hanging on a wall somewhere the next time I go over to my parents place.

Here's a video just to show off. Enjoy the screaching sounds. I wanted to cut the sound and have it be a silent film but apparently that's not an option. YouTube should get one that but until then turn the volume down.

Where to now that I've met this goal? Well I'm going to take it all apart and sell it for scrap....Nope. Not even funny. Even as I look at the screen I'm not laughing. Well I've got some ideas. I'm thinking about making an enclosure to hold all my air ride equipment and sound equipment for the Blazer. Im also thinking about guitar bodies, and missing dashboard buttons, and signage, and random small engine parts.

Saturday, October 8, 2011

X Rails and Ganty assembly

Its days like this that make me proud to be a DIYer. Drilling the holes for the rails was much simpler than I had anticipated! I also noticed that CNCRouterParts just put out a jig to help people do the drilling. My dad owns a lower end drill press from Harbor freight. It works pretty well but you can tell it has a noticeable amount of play in the chuck so every hole has a small amount of variation in it.

In order to avoid compounding the variability I took extra precautions to ensure each hole was as close as possible. It worked out really well this time and I saved a good amount of cash by drilling the holes myself rather than buying the rails pre-drilled from FLA (not to mention the time I would have spent waiting for them to be shipped and get here )

For those of you willing to take the venture into making your own rails heres what I did.

Set up a guide to make sure your at least the same distance from the edge each time. I used a small piece of aluminum angle I picked up from Lowes  Use a center bit or a counter bore bit to start a small pilot  hole. Use some cutting fluid with every hole you drill. It makes things go so much better...like butter. lol not really but it did make a big difference. After you have each of the holes started, move up to a drill bit about half the size of the final 3/8 bit your going to use. Any thing will do, just make sure you use the cutting oil. With this bit you can either go all the way through or only partially. Both are good but we found that not going all the way through helped to hold the cutting fluid when you move up to the final 3/8 bit.

Here's a couple pictures of the setup I had going on the drill press. It worked really well.



Once all the holes are cut it all goes together like seen in the drawings. An interesting side note is that the assembly forum post that I mentioned

http://www.overclock.net/case-mod-work-logs/755828-complete-2-x-3-custom-cnc.html

Yeah that one. It shows him placing the carriage bolts on the 8020 and then tring to get the rail to go on it. That seems really difficult so I just put a bolt and nut in each of the holes and slid the rail into place. It only took a couple minutes. One of the legs was a wee-bit (sp?) close but in the end it all worked out.


That's all I had planned on doing today but I finished pretty early in the day so I got to throw the gantry together. That was much more complicated. The 3030 extrusion is extremely hard to drill through in a straight line. Even when using a jig made from another piece of 8020 I was typically not perpendicular to the piece.




Getting to this point never loses its appeal. Being able to push the gantry along that x-rail is the first pay off you get in a CNC build like this. This time I plan on cutting something. The original machine I tried to construct out of MDF never made it past the gantry push stage.

This machine is without a doubt the most sturdy machine I've attempted to construct so far. I feel confident that it will withstand the abuse were going to put it through.

Ok so whats next? Next I need to drill the holes for the Y rail. Mount that and the associated bearings. Drill the Z axis rail and mount that plate.. Then comes the hard part.... Finishing. Ive got some power train parts I need to order but that going to wait until I get the table assembled.